Centrale électrique TU30-LK CBE
Power station TU30-LK CBE
Back to products
Boitier habitacle 7421079590 01 Renault Premium DXI
Cabin box 7421079590 01 Renault Premium DXI
Carte pour Aérotherme gaz MINIGAZ MH ECO3
Click to enlarge

Card for MINIGAZ MH ECO3 gas unit heater

Reference Repturn : CVC085

Electronic board

SOLARONICS

Our services for professionals :

Our offers are reserved for professionals.

Individual? Find a repairer near you

* Shipping costs for metropolitan France and Corsica. For euro zone countries outside France, cost €49 (excl. VAT) return. For countries outside the euro zone, on quotation.

Common faults and malfunctions

  • Total machine failure
  • Reset button out of order
+ failures
Compatible equipment

MH ECO3 gas unit heater

Part description and references

Solaronics MH ECO3 gas unit heater electronic board repair

What is the role of the electronic board in the MH ECO3 industrial hot air blower?

The Solaronics MH ECO3 gas unit heater is a warm-air heating appliance designed for industrial buildings, workshops or tertiary spaces. It operates by burning natural or propane gas, whose heat is transmitted to an exchanger and then diffused by a helical fan. The electronic board controls the burner and fan, managing the ignition sequence, monitoring safety devices (pressure switch, thermostat, flame sensor) and controlling air flow. It guarantees safe combustion and constant air temperature in the room.

What are the known faults on the electronic board of the Solaronics MHECO3 helicoid gas unit heater?

Like all electronic parts of heating systems, the board of a direct blower for industrial buildings can fail. It is possible, for example, for the machine to fail completely, with or without the reset button failing.

How to repair the MINIGAZ MH Eco 3 unit heater board

Are you looking for a repair solution for your circuit board fitted to the Solaronics Minigaz MH Eco 3 heating system? We can take care of your equipment as quickly as possible.

Our electronic board repair process consists of four steps:

  • Diagnosis: our electronics technicians use test benches to identify the cause of the fault on your part.
  • Repair: we replace defective electronic components.
  • Preventive maintenance: we carry out a thorough check of the electronic board to prevent future failures.
  • Aesthetic renovation: we renovate the aesthetic appearance of your equipment, if required.

    • In the event of a fault on your electronic board fitted to a MINIGAZ MHEco 3 High-Performance unit heater, call on our specialized repair expertise to get your unit back in working order.

    How can I have it repaired? And how much does the repair cost?

    To have your customer's electronic box or equipment repaired, we suggest you go to your online online. You can then make a new "service request" and enter all the information about the part and its problem. Our repair services are reserved for professionals.


    Transport and delivery: You have the option of using our transport service to ship the faulty part from your company. Once your request has been validated by our team, you'll receive a shipping label to stick on the box in which you've packed your part. In this case, the cost of transporting your part is €34 round trip (€21 one way and €13 return). You can also choose to ship the part yourself, or hand-deliver it to us in Couëron (44).


    Repair rates: For repair services, we draw up customized estimates based on the characteristics of your part and the breakdowns or problems encountered. Once the part has been received and diagnosed in our workshops, you will receive your quotation in your customer area and by email. The service will be carried out once your quotation has been validated.


    Warranty: Parts repaired in our workshops are guaranteed for 1 year from the date of repair. This means that if your equipment breaks down again or has a problem within the warranty period, we will pay for transport, any new spare parts and any other services required to keep it running smoothly.


    Customer service : Our customer service team is on hand to answer any technical or practical questions you may have. Our switchboard is open Monday to Friday, 8.30am to 12pm and 2pm to 5pm, on +33 9 72 10 22 50. You can also contact us by email at info@repturn.com.

    Repturn is not an authorized distributor or reseller of the products presented on this website. The references, brands and logos used are the property of the companies holding the rights. Trademarks are used to identify the products we repair or recondition.

    Whychoose us
    ?

    icone-france
    100% French repair
    pictogramme-rapide-repturn
    Fast service: 48 hours on average
    icone-prix-repturn
    Up to 70% cheaper than a new part
    icone-service-client
    Customer service at your service
    IMG_20230208_114131

    We also repair...

    5 steps to electronic renovation

    5 steps to electronic renovation

    You detect a fault on an electronic part

    Do you detect a fault on an electronic part? Go to our repair catalog to check whether we support parts similar to yours. If in doubt, contact our customer service department: 09 72 10 22 50
    Contact us

    Make your repair request online

    From your customer area, make your service request online. Fill in the form with details of your part and its breakdown. Choose whether you'd like to use our carrier or handle the shipment yourself. Carefully pack the part and any accessories. The carrier will collect your part directly from your premises.
    My customer account

    Diagnosis of the electronic fault

    When we receive your part in our workshop, it is assigned to a technician specialized in repairing models like yours. He will establish a diagnosis by checking the various functions and elements of your case: components, soldering, program (code), electronic cards, screen... Following this study, you will receive a quotation by email and on your customer account with the solution envisaged by our technician: a repair service, a reconditioned part in exchange or a diagnostic package if the part is functional.
    Read more

    Setting up the solution

    Once the estimate has been validated and paid for in your customer area, our technician carries out the chosen service. Whether it's a repair or an exchange with a reconditioned part, the box is checked, repaired and programmed to match your equipment. We also carry out preventive maintenance, so that you can be sure that your part will be in good working order for a long time to come!
    Need help?

    Receive your guaranteed part

    We send your part directly to your company or home. You benefit from a 12-month warranty on our service.
    5 steps to electronic renovation