Placeholder
IMO_PTCAN CPC4 ECU for Mercedes Actros
Back to products
Placeholder
Board for the Mitsubishi AL2-24MR-A Programmable Logic Controller
Awaiting product image
Click to enlarge

SBS-4 Control Panel 9062554 for ABAC Air Compressor

Reference Repturn : AUT067

Control Panel for an Air Compressor

ABAC

Our services for professionals :

Our offers are reserved for professionals.

Individual? Find a repairer near you

* Shipping costs for metropolitan France and Corsica. For euro zone countries outside France, cost €49 (excl. VAT) return. For countries outside the euro zone, on quotation.

Common faults and malfunctions

  • Display fault
  • Flickering screen
  • Broken Screen
+ failures
Compatible equipment

ABAC RS10 Screw Air Compressor

Part description and references

Repairing the SBS-4 9062554 control panel for the Abac RS10 air compressor

What is the Atlas Copco SBS-4 9062554 control panel used for?

The SBS-4 9062554 control panel is installed on certain Atlas Copco air compressors. It serves as the primary interface between the user and the compressor.

This panel is used to control the equipment, access operating parameters, and display service information, alarms and any faults. It also transmits the commands required for proper air compressor operation.

The keypad and display must be in good working order to operate and monitor the compressor correctly.

SBS-4 9062554 Control Panel Malfunctions

Like any electronic device, the SBS-4 9062554 control panel may develop faults over time. The most common faults are:

  • Display fault

These malfunctions can result in a partial or unreadable display, or even a screen that flickers or remains completely dark. In many cases, these issues are caused by wear and tear on certain electronic components, connection problems, or malfunctions affecting the display and control circuits.

Choose Repturn for SBS-4 9062554 control panel repair

Are you looking for a repair solution for your SBS-4 9062554 control panel installed on an Abac air compressor? Our technicians can service your equipment as soon as possible.

Our repair process consists of several steps:

  • Diagnosis: precise identification of the source of the fault using our test equipment.
  • Repair: replacement of defective electronic components and restoration of the circuits concerned.
  • Complete inspection: check that keypad, display and panel functions are working properly.
  • Preventive maintenance: overall control to limit the risk of new failures.

If you experience key malfunctions, display issues, or a failure on an Atlas Copco SBS-4 9062554 control panel, rely on Repturn’s expertise to restore your equipment to working order without replacing the entire system.

How can I have it repaired? And how much does the repair cost?

To have your customer's electronic box or equipment repaired, we suggest you go to your online online. You'll be able to make a new "service request" and enter all the information about the part and its problem. Our repair services are reserved for professionals.


Transport and delivery: You have the option of using our transport service to ship the faulty part from your company. Once your request has been validated by our team, you'll receive a shipping label to stick on the box in which you've packed your part. In this case, the shipping cost for your part is €35.50 (excluding tax) round-trip for mainland France and Corsica (€21 excluding tax for the outbound shipment and €14.50 excluding tax for the return shipment). You can also choose to arrange shipping for the part yourself or drop it off in person at our location in Couëron (44). For countries in the eurozone, excluding France, the transportation cost is €49 (excluding tax). For countries outside the eurozone, the transportation cost will be determined based on a quote.


Repair rates: For repair services, we draw up customized quotations based on the characteristics of your part and the breakdowns or problems encountered. Once the part has been received and diagnosed in our workshops, you will receive your quotation in your customer area and by email. The service will be carried out once your quotation has been validated.


Warranty: Parts repaired in our workshops are guaranteed for 1 year from the date of repair. This means that if your equipment breaks down again or has a problem within the warranty period, we will pay for transport, any new spare parts and any other services required to keep it running smoothly.


Customer service : Our customer service team is on hand to answer any technical or practical questions you may have. Our switchboard is open Monday to Friday, 8.30am to 12pm and 2pm to 5pm, on +33 9 72 10 22 50. You can also contact us by email at info@Repturn.com.

Repturn is not an authorized distributor or reseller of the products presented on this website. The references, brands and logos used are the property of the companies holding the rights. Trademarks are used to identify the products we repair or recondition.

Whychoose us
?

icone-france
100% French repair
pictogramme-rapide-repturn
Fast service: 48 hours on average
icone-prix-repturn
Up to 70% cheaper than a new part
icone-service-client
Customer service at your service
IMG_20230208_114131

We also repair...

5 steps to electronic renovation

5 steps to electronic renovation

You detect a fault on an electronic part

Do you detect a fault on an electronic part? Go to our repair catalog to check whether we support parts similar to yours. If in doubt, contact our customer service department: 09 72 10 22 50
Contact us

Make your repair request online

From your customer area, make your service request online. Fill in the form with details of your part and its breakdown. Choose whether you'd like to use our carrier or handle the shipment yourself. Carefully pack the part and any accessories. The carrier will collect your part directly from your premises.
My customer account

Diagnosis of the electronic fault

When we receive your part in our workshop, it is assigned to a technician specialized in repairing models like yours. He will establish a diagnosis by checking the various functions and elements of your case: components, soldering, program (code), electronic cards, screen... Following this study, you will receive a quotation by email and on your customer account with the solution envisaged by our technician: a repair service, a reconditioned part in exchange or a diagnostic package if the part is functional.
Read more

Setting up the solution

Once the estimate has been validated and paid for in your customer area, our technician carries out the chosen service. Whether it's a repair or an exchange with a reconditioned part, the box is checked, repaired and programmed to match your equipment. We also carry out preventive maintenance, so that you can be sure that your part will be in good working order for a long time to come!
Need help?

Receive your guaranteed part

We send your part directly to your company or home. You benefit from a 12-month warranty on our service.
5 steps to electronic renovation